How to clean scratches on plastic lenses. How to remove scratches on sunglasses? We clean glasses correctly

For storage of glasses, special cases are provided that protect the lenses from scratches. However, many people neglect this accessory. As a result, glasses are often subjected to mechanical impact from the outside, and over time, numerous scratches appear on the lenses. This not only makes the appearance of the product untidy, but can also damage your eyesight.

You can eliminate defects on glasses glasses at home using improvised means: wax, toothpaste, furniture polish and window cleaning spray.

Show all

Ways to fix scratches

In most cases, removing shallow scratches from glasses is not difficult. First of all, you need to wipe the product with a special soft cloth, which is usually included in the kit, or a cloth for computer monitors. The choice of further means will depend on the material from which the glasses are made.

Methods for polishing watch glass from scratches and other damage at home

plastic glasses

You can remove scratches from plastic lenses (both for sunglasses and for swimming) using a special abrasive gel, which is sold in optics stores. It is necessary to apply it to the surface of the lenses, and then wipe it with an alcohol wipe that comes with the kit.

You can also use the tools available at home.

wood polish

You need to spray the glasses with polish, then take Vaseline and rub the lenses with it.



Polish for copper and silver

The algorithm of actions is the same as in the previous method: you need to distribute the polish over the surface of the glasses and rub it in places of scratches.

Spray for computer

To restore the health of computer disks in services, a special tool is often used. It also copes with minor damage to the lenses.

After applying the liquid and wiping for some time, the lens surface should be cleaned with a soft cloth.

Toothpaste

To eliminate scratches, a paste without abrasive particles, such as children's, is suitable. It is necessary to apply a small amount of it on the finger, the size of a ball, and rub it in a circular motion into the scratches. Then the treatment sites are wiped with a damp cotton swab.

If the scratches are too deep, the procedure should be repeated a few more times.

Wax

For polishing plastic lenses, you can use the wax used in the repair and restoration of the car body. This substance must be rubbed in a circular motion into places with scratches and scuffs until the damage becomes invisible.

Wax residues must be removed from the surface with a soft cloth or piece of cotton wool.

Glass washer

Some especially ingenious motorists use car washer to restore the appearance of plastic glasses. It repels moisture and smoothes out microscopic irregularities.

In addition, lenses treated with this agent will fog less.

glass glasses

To polish glasses with glass lenses, you can use the methods described above using polishes, toothpaste and computer cleaner.

The most popular method of cleaning glass glasses is treatment with GOI paste. It can be purchased at hardware stores.




Paste GOI

This tool is made on the basis of chromium oxide and will help get rid of defects on glass surfaces. The following items will also come in handy:

• The polishing material is cloth.
• Microfiber.
• Felt, felt.
• Sander.
• A piece of cotton.
• A little vegetable oil.

It is necessary to fix a felt nozzle lubricated with GOI paste on a grinder and polish the surface of the glasses at medium speed. Every few minutes, the device must be turned off so that the mechanism does not overheat. After grinding, the glass is smeared with vegetable oil and polished with a dry cloth. If there is no place to take a grinder, you can apply manual polishing. To do this, apply GOI paste to the fabric and gently rub it into the glass surface in a circular motion. It is important that the substance is evenly distributed over the surface. After processing, remove the remnants of the composition with a dry cloth.

Let's say right away that there are almost no separate temples and temples as spare parts in Russia. But we found a solution:

There are always glasses that break during transportation, and they serve as our donors. The main thing is to choose the right mount. We have two types of substitutions. We list both:
- "Need a new shackle - aesthetic value does not bother". Price - 150 rubles for a simple mount and 200 rubles for the temple with flex mechanism. We put what fits on the mount. Whether they will be beautiful is a matter of your luck, but the glasses will continue to serve you faithfully. If you want to appear in them in society - change two, they will be the same. The price, respectively, is 300 - 400 rubles. Repair time is 15-30 minutes if we have suitable ones.
- “I have designer glasses - the new temple should match them”. Here exactly two change to be the same. We select from the existing whole and new - donor glasses, show you and announce the amount. You pay their full cost, and we put them on you. The price starts from 500 rubles and above.

11/11/2018 1 1 956 views

Not all people manage to wear such an important accessory neatly. And the question often arises of how to remove scratches from eyeglasses at home. After all, buying new ones is not always profitable, and there may not be time to go to the master, and visibility is noticeably deteriorating.

For such purposes, several methods have been devised that will help get rid of the problem without significant financial and time costs. True, you need to remember that such tips are more suitable for plastic products or sun protection options and minor damage. High-quality optics have their own care nuances.

Where do scratches come from?

No need to think that scuffs and other troubles with glasses happen only to sloppy and careless people. Anything can happen to such a fragile accessory, especially if you are sometimes in a hurry, carry them in your pocket, live with children or pets.

Small scratches that interfere with a good view and image clarity can appear even when a person does not use them. For example, when carried in a pocket, bag, soft case, they may be slightly scuffed from surrounding objects. Also, when lying on a table or actively using products, they gradually become covered with dust particles. When wiping, small grains or sand that has fallen on them easily leave traces.

Methods for removing scratches on glasses

We list simple and affordable ways:

• Polish for wood products - just sprinkle a little on the lenses and add a drop of petroleum jelly. Rub the resulting composition into the glass until the result is obvious.

• A similar tool designed for and - is used very simply. It is applied to glasses and wiped with a soft dry cloth. The procedure can be repeated several times in a row until all scratches disappear from the surface.

• Special tools for computers and other equipment. It is advisable to choose those options that can handle even hard drives. This means that there are no extra abrasives in them. And if such chemical compositions are capable of removing scuffs on complex digital media, then glasses will be dealt with in a matter of minutes. But do not use too much product, in the hope that in this way it will eliminate deep abrasions. It is better to carry out several procedures than to process the product abundantly at one time.
• Toothpaste is the most affordable tool that is present at home for all people. But in order to remove scratches, you need to choose only safe options, that is, those that do not contain abrasives. Gel pastes are also not suitable for these purposes. To polish glasses from scratches in this way, you need to apply a small amount of product the size of a ball and rub in a circular motion with a soft cloth to the place where the defect is present. After that, the glass is wiped with a damp cotton swab or washed under a tap. If necessary, the steps can be repeated several times.

• Wax to restore the car body - easily help get rid of scratches on glasses. A small drop of the substance is enough to rub it into the desired area. The remains of the product after the procedure are cleaned with a soft cloth or cotton swab. The best are such as ATAS Hydrorep, Sonax NanoPro and Hard wax Carnauba Wax 90.
• Glass cleaner - works in a similar way to windows or car surfaces. Using this treatment, you can not only clean glasses without streaks, but also get an anti-fogging effect.

• GOI paste - buy a special product at number 80, which is made on the basis of chromium oxide. But remember that when working with it you will have to use a grinder. For convenience, it is desirable to remove the lenses from the product and process them separately. To do this, a piece of felt nozzle is fixed on the machine, lubricated with a small amount of paste and the surface is polished. In extreme cases, this can be done with your hands, but for the expected effect, you will have to rub the product for a very long time.
• Baking soda - with it you need to act very carefully. For this, a special mixture is prepared. The product is diluted with water in a ratio of 2:1, where there should be less liquid. With the help of a cotton pad, they collect a little money and apply it to the damaged surface. Glass is polished in a circular motion. After the procedure, all residues can be washed off with water.

• The same alternative is baby powder, the level of abrasiveness of which does not exceed 7 RDA. This is a fairly safe product, unable to damage glasses.

Please note that for products with diopters, that is, intended for vision correction, these methods are considered dubious by professionals, as they can lead to a deterioration in their function. In case of serious damage that prevents you from looking at the world around you, you will have to contact the master and restore the glass.

If this is not possible, you should try the following tool. Find an abrasive in a store that sells various art supplies. Work with it only in rubber gloves!

First, simply wipe the glasses with a soft cloth. For convenience, you can remove the lenses from the frame. Take a cotton pad or napkin, apply the abrasive and put them in a separate container for five minutes. After that, rinse the product with water, and do not use the container to store any things, especially for food.

Video: is it possible to remove scratches on glasses?

Since today optical products are not cheap, and it is difficult for a person who needs vision correction to do without them even for one day, it is advisable to monitor their integrity. Careful attitude to the accessory will prolong its service.

1. Always use only hard cases designed for this purpose to store your glasses, even for a short time.
2. Today, there are product models with a special protective film that prevents scratches, abrasions and other minor defects on the surface, this is very convenient and you can immediately buy spare stickers to replace them yourself if necessary.
3. If you wear glasses not for beauty or sun protection, but they perform their direct corrective function, then it is better not to use any improvised means to clean them, try to timely contact the specialists and craftsmen who are present in many opticians today, especially since the cost their work is not so high.
4. If the product was bought for a child, then teach him how to safely wear glasses and instill the basic rules for respecting the accessory, so it will last longer and you won’t have to choose new ones.

Minor scratches can be removed by yourself

Got a nasty scratch on your glasses? Do not rush to the store for new ones. In most cases, damage can be repaired!

You can do it in the workshop. But if there is no way to contact a specialist, then try to cope with the problem yourself. The method and means depends on what material the device is made of. How to remove scratches from sunglasses and for vision?

Glass lens products

Here are some tips to help get rid of shallow damage on the glass lens in optical, sunglasses. But Before you start work, you should remember simple rules.

• Movements should be soft, smooth.
• Be patient: polishing sometimes takes 30 minutes or longer.
• Before polishing, the glass is washed in warm water with the addition of mild soap, without an abrasive component.
• Do not use paper, which is also easy to scratch the glass.

Toothpaste

Toothpaste will get rid of minor defects. The paste is taken as usual, not bleaching, without abrasive. A pea-sized dose is applied to the surface and rubbed until the indentation disappears. Then the glass glasses are cleaned with a damp soft cloth. Rub from the edges to the center, rinse with warm water.

The same if you use dry tooth powder.

Paste GOI

To perform polishing, they take GOI No. 80 paste, which drivers have on hand to polish the car body. The agent is applied to a soft cloth - cloth, felt, felt. Grind carefully by hand or on a manual machine. In the latter case, a felt nozzle is fixed on the machine, medium speed is used.

If there is no machine, they take an electric razor with a linear drive. Remove the foil from the razor. From a soft napkin, which is usually used to wipe monitors, a circle is cut out of such an area that it fits the razor blade and fixed along the edges with a soft silk thread. The device is ready to work!

After the work is done, the glasses are lubricated with vegetable oil and wiped with cotton wool, performing circular movements.

baking soda and water

Baking soda is mixed with water until it becomes a paste. This compound cleans the lens like toothpaste.

CD polish

The substance is sold in a computer store. How to clean the lenses for them is indicated in the instructions using the example of disks.

plastic lens

The disc polish is also suitable for the restoration of plastic lenses. But there are other means as well.

Fill in the scratch

To maintain the thickness of the lens and prevent optical distortion, scratches are masked. To do this, use car wax, which is evenly distributed over the surface. For the same purpose, furniture polish is used. The procedure is systematically repeated as the defective cavity is emptied.

Colorless nail polish works the same way. Take a little varnish on a toothpick, carefully fill the furrows. This "filler" is more durable than the previous ones. The same if you use liquid glass, which is in auto repair shops.

These recipes are applicable to glass glasses.

Remove cover

Unfortunately, it will not be possible to restore the sun protection mirror layer at home. But it is possible to remove it completely from plastic lenses.

Glass abrasive is sold in craft stores. It contains hydrofluoric acid and hydrogen fluoride that react with glass surfaces. For this reason, the agent is not suitable for glass lenses, and before starting treatment, it is checked whether the plastic material has actually been used to make the accessory. The abrasive will remove the anti-reflective and anti-abrasive coating without damaging the plastic.

The agent is applied to the lenses, which were previously removed from the frame, and left for 1-2 minutes to complete the reaction. Then the surface is wiped, washed with cold water. All items that have come into contact with the acid abrasive are discarded.

Disadvantages of self cleaning

Polishing glass at home has several disadvantages. So, if you polish the lenses mechanically and overdo it, then geometric aberrations (deviations from the norm) may appear, since it is difficult to maintain geometry at home. Vision suffers from this, as the eyes get tired.

In most cases, you will have to do a complete removal of the functional coating - for example, "anti-reflective" or "mirror", which reflects sunlight and prevents overheating.

Using the methods described above, it will be possible to remove only hairline scratches, in other cases, a recess will appear at the place of polishing and, as a result, optical distortions.

And one moment. Before processing glass, it is advisable to test the method on an invisible foreign area. After all, if it is incorrect to determine the material from which the glasses are made, then they will be damaged. It is also important to pay attention to the manufacturer's care instructions.

If there is any doubt that home polishing will bring success, it is better to take the accessory to the workshop, especially when it comes to vision correction or an expensive item.

If the glasses are neglected and the conditions for their storage are not observed, scratches appear on the surface. In turn, this leads to image distortion, eye fatigue and visual impairment. We will tell you in our article whether it is possible to remove scratches from glasses or whether you still have to buy new optics. Consider several options for solving this problem based on the characteristics of the material from which the lenses are made.

For storage of glasses, special cases are provided that protect the lenses from scratches. However, many people neglect this rule. As a result, their glasses are often exposed to mechanical stress from the outside. It is the non-compliance with the recommendations of optics specialists that leads to the need to figure out how to remove scratches from glasses.

• If you find a scratch, contact your optician first. Most likely, the specialist will be able to better remove this flaw from the lens.
• If you often scratch your lenses, ask your optician about a protective coating for them.
• Never attempt to remove scratches from dirty lenses. Wash them thoroughly in warm soapy water before starting work.
• If the anti-reflective coating has deteriorated while removing scratches from sunglasses, it is recommended to remove it completely with a cream, then visibility will improve significantly.

How to Remove Scratches from Glasses with Toothpaste

Even homemade products can be effective in dealing with scratches on the glass lenses of your glasses. To do this, you only need toothpaste without abrasive particles and soft felt. Chalk is also suitable, which must first be turned into a powder.

Consider step by step how to remove scratches from glasses:

1. A small amount of toothpaste is applied to a piece of felt.
2. The lens surface is polished in a circular motion. As you work, the toothpaste can be applied to the fabric several times.
3. It is strictly forbidden to use pastes with hard particles, which can further damage the glass.
4. Similarly, you can remove scratches with chalk. It is slightly moistened with water and the surface of the glasses is polished with the help of felt.

There is no doubt about the effectiveness of the paste, but you need to find out how to remove scratches from glasses using this well-known remedy. To make it more convenient to work, it is recommended to remove the lenses from the frame (in the event that they are screwed on with screws). Next, GOI paste must be applied to felt or thick cloth, and the lens should be placed on top (with the scratched side on the fabric). Polish the surface with a circular motion of the lens. It will take a different amount of time for a scratch to completely disappear, depending on the size of the damage to the glass.

After processing the surface of the lens, it will need to be washed in warm water from the remnants of the paste and inserted into the frame.

In this way, small scratches are easily removed. To remove more serious damage, you will need a grinder with a felt wheel, car polishing paste and GOI. This method is effective only when working with ordinary glasses, without tinting and special protective coatings, since the entire surface of the lens is treated.

How to remove scratches from plastic eyeglass lenses

Even deep scratches from ordinary glasses are usually removed quite successfully, which cannot be said about plastic lenses. As a rule, such glasses have an additional protective coating, which is immediately destroyed when trying to get rid of damage to the optics. In turn, on uncoated lenses, new scratches will appear very quickly.

Before starting work, it is necessary to thoroughly clean the lenses from dirt with microfiber. After that, a special abrasive containing hydrofluoric acid is applied to the plastic. As a result of the reaction, the top coating of the plastic is removed along with scratches. However, this method is applicable only for plastic, but the glass surface from the reaction of hydrogen fluoride with silicon oxide will be hopelessly damaged. It is important that gloves are worn when applying the abrasive. After processing, the lenses are well washed in cold water.

Since this method completely removes the anti-reflective coating, it can only be called a temporary way to clean the surface of the lenses. In the future, it is still recommended to purchase new glasses.

How to remove scratches from sunglasses

The method described above removes scratches from sunglasses, the lenses of which are just made of plastic. To do this, you will also need an abrasive agent with hydrofluoric acid in the composition. Just before removing scratches on glasses (sunglasses), it is necessary to carefully prepare the surface and clean it of dirt. Further, it is necessary to act according to the instructions described in the previous paragraph.

If the sunscreen was of poor quality, then most likely it will deteriorate. Then, with the help of a cream, it is completely removed, after which the glasses are used for their intended purpose.