The division additions. The Division: “The Last Stand” – add-on review

Who in childhood did not read folk tales where “living water” resurrects dead heroes? Many peoples of the world believed in the miraculous properties of living water. The opposite of living water is dead water, which also has amazing qualities. In the real world, there is also “living and dead water.” It was first obtained by electrolysis in the 80s of the last century. Devices specially designed for the preparation of living and dead water concentrate two types of water – anolyte (acidic) or “dead” water and catholyte (alkaline) – “living” water. The main purpose of using living and dead water is treatment.

Activator of living and dead water - the price of the device is affordable for everyone

You can order a living and dead water device via the Internet or buy a device in the Health pavilion at the All-Russian Exhibition Center

Features of treatment with living and dead water

Dead water (anolyte) is an acidic solution with excellent bactericidal properties. Sour and slightly astringent in taste, dead water is colorless. It is used in the disinfection of dishes, medical materials, and premises. In addition, dead water is an excellent remedy for colds. With its help, stomatitis and fungus are successfully treated.

Living and dead water has many features and healing qualities. This is a rare and universal remedy that can help in the fight against various diseases.

Before starting treatment with these products, you need to diagnose the body. It is recommended to consult a doctor and undergo the necessary medical tests.

Activated water is a good adjuvant in the treatment of a wide range of diseases. The liquid retains its beneficial qualities for only a couple of days, so its benefits are quickly lost.

What is living water

In ancient Russian fairy tales, living water could only be obtained from healing springs, but in reality such liquid is formed through simple chemical processes. Its preparation takes place using special devices.

In them, the liquid undergoes electrolysis, due to which the water receives a positive (dead) or negative (living) electrical potential. During electrolysis, the properties of water improve. It is cleaned of harmful chemical compounds, pathogenic microorganisms and impurities.

Composition and features

A distinctive property of living water (catholyte) is its pH level, which is equal to or higher than 8. Thanks to this, it has a biostimulating effect, restores immunity, and has antioxidant properties.

The positive qualities of living water lead to the activation of all natural processes in the human body, improving appetite and metabolism, normalizing blood pressure, and improving overall health. Catholyte accelerates the healing of wounds, bedsores, burns, ulcers in the stomach and intestines. Regular intake of liquid helps smooth out wrinkles and improve hair growth.

The product does not have any side effects, which means it is not capable of causing harm to health. Catholyte must be kept in a dark room in a closed container. But even with proper storage, after 2 days the liquid will lose its positive biochemical qualities, so it must be consumed as quickly as possible.

The pH level of dead water (anolyte) does not exceed 6. The liquid has antimicrobial, antiviral and anti-allergenic effects. Anolyte has antimetabolic and cytotoxic properties and effectively fights inflammation.

A set of useful qualities determines the disinfecting properties of dead water. It is used to disinfect clothing, dishes or medical instruments. Using anolyte, wet cleaning of the room is carried out. This is useful to do if there is a person in the room who is sick with an infectious pathology.

Anolyte helps with colds, diseases of the ears, nose or nasopharynx. To prevent influenza, you can gargle daily with this remedy. In addition, taking dead water calms the nervous system, lowers blood pressure, reduces pain in the joints, and prevents the formation of kidney stones.

How to make a device for living water

The device for living and dead water is designed quite simply, so its installation will not take much time and effort. To make it you will need a glass vessel, a pair of wires, a source of electricity and a piece of fabric.

To make an electrolyzer, a bag made from a piece of fabric that does not allow water to pass through is placed in a glass jar. The fabric is secured in such a way that it can be easily reached. Then take a pair of wires (preferably made of stainless metal). One is placed in a bag and the other in a glass vessel. To power the device, connect the wires to a DC source.

The electric activator will not operate when connected to an AC power source. To convert alternating current to direct current, a powerful diode is connected to the positive pole of the electrical source. If manufactured correctly, the device will immediately begin the chemical process of water electrolysis.

Preparing water

Recipes for preparing living and dead water are simple. Plain water is poured into a glass jar with a bag. After this, the mechanism is connected to the electrical network. The device should operate for 12-15 minutes.

After the mechanism is completed, living water is formed in the jar, and dead water is formed in the bag. Thus, it is possible to produce catholyte and anolyte quickly and with virtually no material costs.

Self-prepared products do not have very high biochemical characteristics. To prepare a higher quality product, purchase an electric activator in special retail chains.

Domestic use

Treatment of various diseases with living and dead water is carried out by ingesting liquid, washing or applying compresses.

Catholyte and anolyte are used to treat acne or other skin problems. To improve the condition of the epithelium, you should wash your face with live water 2 times a day. After washing, you should not wipe your face.

Wrinkled skin can be smoothed out by compresses with heated catholyte. To moisturize dry skin, wipe your face with anolyte. 10 minutes after wiping, make a compress with catholyte.

Once a week you should wipe your face with a solution based on living water. To prepare it, stir 1 tbsp in half a glass of catholyte. l. salt and 1 tsp. soda The mixture helps smooth out wrinkles and overall rejuvenation of the skin.

Dead water helps with rhinitis. To treat a runny nose, rinse your nose with liquid 3-4 times a day. For young children, the product should be instilled into the nose using a pipette. The runny nose disappears the very next day.

Catholyte can become an auxiliary medicine in the treatment of gastritis. If the disease manifests itself, you should take the liquid for 3 days.

To prevent exacerbation of inflammatory processes, drink half a glass of the product 30 minutes before meals. This procedure reduces the acidity of gastric juice, which leads to a decrease in pain, improved appetite and overall well-being of a person.

For dryness and swelling of the skin during diathesis, you can use anolyte. First you should wash your face, and after that you need to apply a compress for 10 minutes. The procedure is repeated up to 4 times a day. Unpleasant manifestations disappear a couple of days after the manipulations.

With the help of dead and living water, prostate hypertrophy can be treated. The treatment course lasts no more than 8 days. 1 hour before meals, take half a glass of catholyte. Drink another 1 glass of liquid before bed. If there is no increase in blood pressure, gradually increase the dose to 1 glass before meals. During the treatment period, the sore spot is moistened with anolyte, after which a compress with living water is applied.

For prostate hypertrophy, special suppositories soaked in catholyte are made from gauze. After just 3 days of treatment, pain and the number of urinations decrease. On the 5th day, appetite improves and digestion normalizes. During treatment, it is recommended to take walks in the fresh air. Repeated use of therapy is recommended no earlier than 30 days after completion of the previous course of treatment.

For various manifestations of allergies, gargle, mouth and nose with anolyte. 10 minutes after each rinse, you need to drink half a glass of catholyte.

Various redness and rashes caused by allergies can be additionally moistened with anolyte. After a few days of treatment, allergy symptoms stop. Sometimes a second course of therapy may be necessary.

Compact, simple and safe water activator Melesta.

With its help you can get healing water. Medicinal water is used for a large number of diseases!

It is in demand among the population due to its beneficial properties.

Advantages of the Melesta device:

You can obtain “living” and “dead” water by using the electrolysis method.

catholyte - alkaline/live

anolyte - acidic/dead

The first option - catholyte - is a stimulator of biological processes; it is characterized by increased dissolving and extracting ability and a high level of absorption and chemical activity.

And anolyte is a preservative and antiseptic of great strength. It has inhibitory properties and the ability to slow down biological processes. It is successfully used in the fight against fungi and microorganisms. Both types of water are widely used in medicine and are used to treat a number of diseases. In addition, anolyte and catholyte are used for economic purposes.

The device comes with instructions that tell you about the treatment of 49 diseases using the water obtained, as well as its use in everyday life.

Specifications:

power supply 220 V/50 Hz

activated water output: 0.5 l catholyte and 0.3 l anolyte

power consumption: 110W

device weight: 1 kg

Food-safe plastic serves as the material for the main container of the device, in which catholyte is formed during electrolysis. In the inner container there is a window between the electrodes - a diaphragm, where the anolyte is created. The lower part of the cover has an insulating base on which the cathode and anode are mounted.

Stainless steel cathode. The anode in the device is made of titanium coated with ruthenium oxide, which makes it insoluble and the treated water non-toxic.

Operating principle: Having undergone cathodic electrochemical treatment, water, as a result of the transformation of dissolved salts into hydroxides, acquires an alkaline reaction, which is accompanied by the following processes:

the oxidation-reduction potential (ORP) of water decreases sharply

surface tension decreases

the concentration of dissolved elements decreases: nitrogen and oxygen

the concentration of hydrogen and free hydroxyl groups increases

electrical conductivity decreases

the structure of the hydration shells of ions and the free volume of water changes

The formation of soluble potassium and sodium hydroxides and the resulting increase in pH causes a shift in the carbon dioxide equilibrium and the appearance of sparingly soluble magnesium and calcium carbonates. They are formed from the soluble compounds of these metals present in the source water. Iron and heavy metal ions are converted almost completely into insoluble hydroxides, which causes a white precipitate in the cathode or “living” water.

CEO
LLC "Center for New Technologies" Doctor of Medical Sciences, Professor of the Russian Academy of Natural Sciences

Address: 644043, G. Omsk

St.. Volochaevskaya 19

Office - Center

Timework:10:00 - 18:00

Weekenddays: sub. - Sunday

Driving directions

Newsletter

A device for preparing Living and Dead water with an ANODIC electrode made of ultra-pure GRAPHITE

Product in stock

Price: 0 2 400 rub.

You can maintain your health and cope with various diseases by drinking specially treated plain drinking water, as they said in the old days, dead water combined with living water. This is a miracle of nature that can cleanse our body and rejuvenate it. It is only important to use this miracle given to us correctly!

Advice from Professor, Doctor of Medical Sciences I.P. Neumyvakina (Living and Dead Water: Truth or Fiction).

Many customers ask: Why doesn’t the device for preparing Living and Dead water have a timer???

We answer.

Because the time (speed) for preparing Living and Dead water depends on the composition (concentration) of salts and minerals in the source water.

The composition of water in the tap can change several times during the day, which is checked with a TDS meter.

The more salts and minerals in the water, the faster the water heats up during electrolysis and vice versa.

With a high concentration of salts, water during electrolysis can heat up to 40-50 degrees in 1, 2, 3 minutes and vice versa, with a low concentration in 15, 20, 30 minutes or more.

There is no benefit from a timer, and it may even be harmful. You will rely on the timer, but it will also let you down. And why complicate the design of the device; the fewer connecting nodes, the more reliable the design. Less chance of breakdown. Right???

Therefore, the preparation of Living and Dead water must be monitored not by time, but by temperature. This does not require a thermometer. You can easily check whether the water is warming up by touching the outside of the jar.

Moreover, the device must not be left switched on unattended!

The device for preparing activated Living and Dead water is a lightweight, uncomplicated, compact device that allows everyone at home in just 5-6 minutes to get about 1 liter of activated (“live” - 700 ml., and “dead” - 300 ml. ) water. To do this, just fill a liter jar with water, as indicated in the instructions, plug into a 220V outlet and after 5-6 minutes, drain the already activated water into different vessels. The device is electrically safe, reliable, and consumes as much electricity as a 60-watt light bulb.

The process of preparing Living and Dead water is very simple:

Take a regular 1 liter glass jar ( jar NOT INCLUDED in delivery), insert a canvas bag into it ( included in delivery), pour water into the jar and into the bag at the same time so that the upper edge of the bag is above the water level, about 1 cm, so that the water does not mix, then place the anode electrode (+M) in the bag, it will turn out acidic (Dead) water, and simply place the cathode electrode (-G) in a jar, in the jar behind the bag you will get alkaline (Living) water, if the electrodes are swapped, in this case you will get alkaline (Living) water in the bag, and acidic (Dead) water in the jar. Turn on the device. When the water in the jar heats up to 40-50 degrees Celsius, electrolysis must be stopped.

After electrolysis, take out the device and very simply take out the bag from the jar of acidic (Dead) water, pour the water from it into another container, the alkaline (Living) water remains in the jar. All activated (Living) and (Dead) water are ready.

For this model of the device, the electrodes are made:
The cathode is made of food grade stainless steel with the addition of TITANIUM,
The anode is made of ultra-pure GRAPHITE.

Stainless steel and the vast majority of metals and alloys are not resistant to anodic dissolution.

When an electric current is passed, electrodes made from these materials dissolve, and ions of nickel, chromium, vanadium, and molybdenum pass into the water, poisoning it. In the manufacture of electrical activators intended for medical research, resistant materials are usually used. In particular, for the manufacture of anodes - nickel or titanium, cathodes - platinum, ultra-pure graphite. For diaphragms, porous fluoroplastic or ceramics are used.”

Living and Dead water has properties similar to those of body fluids (blood, lymph, etc.), so the body does not need to refine it, it immediately enters into life and thereby eliminates the causes of many diseases.

Living and Dead water are also used in everyday life, gardening and horticulture, for hygienic purposes, in animal husbandry, poultry farming, beekeeping, etc.

If you pay attention, under the main photo of the device on this page, there are small photographs; if you open the photo with tomato seedlings, you will clearly see the difference in the two containers, in the growth and appearance of the seedlings. Tomato seeds of the same variety were planted on the same day, those on the left were watered with plain water, and those on the right with activated Living Water. This result is nothing more than direct confirmation of the beneficial effects of Living Water on plant growth as well as on all living things and the human body.

By adjusting the duration of electrolysis, it is possible to obtain water of the required ORP (Oxidation Reduction Potential) concentration, which
measured in units - mV.

Dead water (acidic), ORP of this water is +400 mV or more, an excellent bactericide, disinfectant.

Used in the prevention and treatment of colds, flu, sore throat.
Reduces blood pressure, calms the nervous system, improves sleep.

Helps in the treatment of periodontal disease, stops bleeding gums, dissolves stones on teeth.
Reduces joint pain. Quickly helps with intestinal disorders.

Dermatomycosis (fungal skin diseases) disappears in a few days.
The disinfection properties of dead water are enhanced if 0.5 g is dissolved in 1 liter of water. — (on the tip of a knife), table salt before turning on the electrolyzer.

Household use: Disinfection of residential and non-residential premises, drinking water, soil, containers, clothing, shoes, removing scale from the walls of dishes, increasing the shelf life of vegetables and fruits and much more.
Normalizes the functioning of the digestive tract in domestic animals and poultry.

Living water (alkaline) The ORP of this water is 100 mV or more, an excellent stimulant, tonic, and source of energy.

It moves the entire body, gives energy, vigor, stimulates cell regeneration, gently increases blood pressure, improves metabolism.

Excellent healing of wounds, ulcers, including stomach and duodenal ulcers, bedsores, burns.
Helps in the treatment of prostate adenoma, in the treatment and prevention of atherosclerosis, polyarthritis, osteochondrosis.

Household use: Accelerates the germination of grains and seeds for planting, stimulates the flowering of domestic flowers, revives green vegetables and wilted flowers, improves the taste of baked goods (when kneading dough with live water), the quality of syrup for feeding bees (bees become more energetic), stimulates growth and resistance to disease poultry and livestock (the mortality of young animals is reduced), watering the beds with live water stimulates the ripening of the crop.

Concomitant use living and dead water helps fight diseases such as allergies, hepatitis, psoriasis, and women's diseases (colpitis, cervical erosion).

Activated water is used in Japan, Austria, Germany, Poland, India, Israel, and CIS countries. This water is absolutely not dangerous for either external or internal use. This was confirmed back in 1988 by the USSR Pharmacological Committee (DECISION Mo. 211-252*/791).

PAY SPECIAL ATTENTION that in different cities the mineralization of water is different. Mineralization is the amount of dissolved salts and minerals in water. The higher the mineralization of water, the faster the electrolysis process (water preparation) occurs and vice versa.

In order to obtain water with the water ORP (redox potential) required for the body, it is necessary to stop electrolysis (water preparation) at the moment when the water in the jar heats up to the temperature 40-50 degrees Celsius, i.e., when holding the jar, the hand tolerates it freely, and the electrolysis time does not matter. DO NOT bring the water to a boil!!!

Water for preparing F and M water is taken from the tap, preferably passed through a filter - a jug (Barrier, Aquaphor, etc.)

ORP - meter KL - 169C, a portable device for measuring the redox potential in solutions

ORP meter is a compact device for determining the redox potential of any solution. The unit is produced in a waterproof shell and allows measurements to be taken with high accuracy. For testing, a liquid with an alcohol level not exceeding 50 ° and an electrical conductivity not exceeding 10 µS can be taken. The equipment comes with factory settings, but you can calibrate it manually if you wish. Contents 1 Characteristics and use of the device 2 ORP meter device: calibration 3 Using the ORP meter 4 Recommendations for working with the ORP meter Characteristics and use of the device The device shows the level of electron activity in the processes of oxidation and reduction of the liquid. In essence, we are talking about processes involving the transfer or addition of particles (electrons). Results are displayed in millivolts and can be shown with a minus or plus sign. The processes of oxidation and reduction of a liquid are directly related to its temperature and acidity. An ORP meter is simply irreplaceable when preparing water for swimming pools, since it is with the help of this device that one can judge the effectiveness of disinfection measures. This unit is necessary to control the quality of activated water, which has healing properties for our body. Thus, with a lower ORP value of the liquid compared to the ORP meter pH value of the aqueous environment of the human body, an excess of electrons is formed. Thanks to this, water acquires healing properties: - it becomes a good antioxidant; - the effectiveness of cellular barriers increases; - allows you to neutralize free radicals; - the aging of the body is inhibited; - metabolic processes are improved; - the body’s immune defense is activated; - the body is cleansed; - general tone increases. The device is equipped with a backlit LCD display, so measurements can be taken even in a poorly lit place. The compact unit is easy to store and carry. Technical characteristics of the ORP meter Technical characteristics Indicator Unit of measurement Amplitude of measurements -1999 - +1999 mV Error +5 mV Measurement step 1 mV Display scale 7 characters Liquid temperature 0-50 °C Power supply 4x1.5 V (AG-13) Dimensions 170x36x23 mm Weight 96 g The device is supplied with the following equipment: Measuring device Screwdriver for calibration Battery (4 pcs) 1.5 V each Instructions Plastic container for storing the device ORP meter device: calibration The device is sold with factory settings, which were made on the basis of the calibration liquid with an indicator of 250 mV. To manually adjust the device, you can only use a solution specially designed for this purpose. It is important to know: the calibration fluid can deteriorate in the open air, so you should only use tightly sealed containers to store it. After calibration, the liquid should be poured out and not placed back into the container. To set up the device, it is better to use fresh calibration liquid. Calibrating the ORP meter: Place the activation electrode in distilled water for several hours. Place the device in the ORP calibration solution. Stirring lightly, wait until the display stabilizes and, using a small screwdriver, turn the calibration trimmer to 265mV. Rinse the pH meter electrode with distilled (deionized) water and dry with a tissue. When making precise measurements in scientific testing, it is recommended to calibrate the instrument before each use. But to take measurements in everyday life, it is enough to do this once every three months. Attention: a change in the values ​​on the display by 10 mV in one direction or another is quite normal, because the electrode of the device is highly sensitive. Using an ORP meter If you need to analyze a liquid in a container, you should not dip the device directly into the container with the test solution. It is better to take a small amount of liquid and pour it into a small clean container. Next, perform the following sequence of actions: Remove the cap covering the electrode of the device. Dip the electrode of the device into the container and stir the liquid a little. Now turn on the device by pressing the appropriate button. Within 1-3 minutes, the measurements on the instrument display should stabilize. After this, you can view the device readings on the LCD display. The results should be interpreted in millivolts. Turn off the device using the appropriate button. After use, you need to rinse the electrode of the unit in distilled water and put on the cap. Several signs may indicate that it is time to replace the batteries: - the display does not light up after turning on the device; - after switching on, the display lights up briefly and immediately goes out; - the readings on the display do not stabilize for a long time. In this case, it is worth selecting suitable batteries and replacing them in the device, observing the polarity. Video review of ORP in “Living and Dead” water Recommendations for working with an ORP meter Before buying an ORP meter device, you should familiarize yourself with the rules for its use: Use the unit only in the conditions and environment that are listed in the instructions for the ORP meter. Do not store the device in places with high ambient temperatures or in direct sunlight. The unit should be stored in a vertical position. For this purpose, there is a special stand on the cap of the unit. Do not touch the electrode with your hands. This may cause the ORP meter readings to become inaccurate. If you do touch the ORP meter electrodes, immediately rinse them in distilled water. Always close the cap on the device tightly after use. This will increase its service life and protect the electrode. If salt deposits appear on the device and in the area of ​​the hood, use a soft cloth to clean the unit. Do not test solutions that are too hot. This may damage the device. After analyzing solutions with a high content of impurities, be sure to rinse the device. When taking measurements, it is better to use a special wrist strap rather than holding the device in your hand, since the readings may be distorted under the influence of static electricity. This is called “deception of ORP meters.”

Product in stock

Price: 2,800 2,500 rub.

Ultrasonic air humidifier "Aroma diffuser - Aroma lamp"

In an ultrasonic humidifier, water from a tank is supplied to an ultrasonic membrane vibrating at a high frequency, where it is split into tiny sprays that “fountain” above the membrane. The air flow created by the fan delivers the resulting cold steam into the room. With small dimensions, ultrasonic humidifiers have high performance and can be suitable for large rooms. Watch the video review!!! Why is dry air harmful to health? Dry air from a winter street, heated indoors, like a powerful pump, pumps moisture from everything it comes into contact with, which means it takes moisture away from a person. At low air humidity, water from the skin, mucous membranes of the respiratory tract and eyes actively moves into the environment. As a result, the protective moist layer in which beneficial bacteria live and our defenders, antibodies, work, decreases. The skin, mucous membranes, and vessel walls become brittle, bleeding, and vulnerable to infection. Children are especially susceptible to air humidity levels. The skin and mucous membranes of babies are very moist, tender and sensitive. As a result, loss of moisture primarily reduces the protective abilities of the respiratory tract, as a result of which respiratory diseases - rhinitis, bronchitis and even pneumonia - become more frequent. In addition, dry air contains many different types of pollutants. Dust particles, bacteria, fungi, spores, wool - these are the agents that we fight with wet cleaning. In dry air, the content of these harmful particles is much higher, which also contributes to its harmful effects. Since the listed agents are the worst enemies for many people - allergens, it is obvious that dry air is the enemy of allergy sufferers! That is why, to prevent respiratory diseases and allergic diseases, it is recommended to maintain indoor humidity at least 40, and preferably 50-60%. The need to humidify the air is obvious for those who want to prevent and delay the appearance of wrinkles. Loss of moisture from the skin is the reason for its aging! Few people know that in an attempt to preserve beauty and youth with the help of protective and moisturizing creams, when using them in conditions of low air humidity, we cause serious harm to the skin! When the relative humidity is insufficient, a moisturizer, instead of attracting moisture from the outside, pulls it from deep within the skin, thereby making it even drier! In addition, air humidity at 50% is simply the most comfortable. With such humidity, both children and adults feel comfortable; with such humidity, the day passes in activity and vigor, and the night passes in a calm, pleasant sleep. The air we breathe contains many harmful substances: carpet dust, tobacco smoke, pollen, animal hair, dust mites, etc. These substances cause allergies and diseases of the respiratory system. Consequences: Headache Dizziness Irritation of the nasal cavity Nausea Respiratory diseases Allergies Asthma Pulmonary diseases Skin irritation Watch the video review!!! You can turn your apartment into a winter garden by adding dozens of indoor plants, and with regular watering, the moisture they produce can be enough to maintain acceptable relative humidity. But taking into account the limited living space in our apartments, as well as due to aesthetic considerations, this method is not very applicable, and it will be much easier to install a small device that will not only increase air humidity and clean it, it will maintain it at a given level Your level. Manufacturer: KBAYBO Application: 21-30 m2 Capacity volume: 300 ml. Certification: CE,UL,RoHS Humidification Method: Mist Humidity Control: Manual Mist Output (gallon/day): 30ml/H Type: Ultrasonic Humidifier Control Method: Keypad Noise:

Product in stock

Manufacturer

Price: 0 1 350 rub.

Nature has provided everything necessary for human life on Earth, including an effective cure for all diseases. It is not at all necessary to pay for visits to the doctor and expensive pills; it is enough to use a substance that everyone has at hand.

Oddly enough, we are talking about ordinary water, which with the help of a special apparatus can be turned into completely unique one. The Melest activator is designed specifically for this purpose, and we will try to explain how it works.

Description of technology

Preparation of living and dead water occurs using electric current. The anode and cathode are connected to the container. Under the action of electrodes, H 2 O molecules receive either a positive or negative charge. The first are called anolytes, and the second are called catholytes, but popularly they are simply called living and dead water.

A home device for making living and dead water consists, as a rule, of a clay or fabric glass and a plastic case with an integrated electrical circuit. There are many devices on the market for self-production, but the Melesta series compares favorably with others due to its practicality, compactness and low price.

Buying a Melesta water activator is beneficial for those who need a small but effective assistant.

Beneficial features

The product obtained using this water activator has complementary properties. Living water is a weak alkali, which, when taken orally, has a strengthening, immunomodulatory and invigorating effect. It accelerates the processes of recovery and regeneration in the body, and is indispensable during the fight against diseases and as a preventive measure.

The dead, that is, weak acidic solution, has found its use as a powerful disinfectant. When taken orally, the risk of developing viral diseases is significantly reduced. In addition, they can treat wounds and prevent bedsores. During the treatment of a particular disease, a combined intake of activated liquid is usually prescribed at different times of the day.

Instructions for use

A device for making living and dead water is indicated for patients in the following cases:

Thus, almost everyone who has ever encountered health problems needs to buy a device for preparing living and dead water.

The most convenient way to buy the Melesta device is on our online store website. This brand is made from safe and modern materials and is one of the best electrical activators at the moment. We offer to purchase this device at an attractive price, and also provide convenient conditions for delivery and payment for goods.

Free instructions for use with methods of treating more than 50 diseases from G.P. Malakhova.

Compliance with hygienic requirements. TU 5156-002-32064510-07.

Certificate ROSS RU. AYA 36 V 28640.

04 January 2013 04 January 2013 04 January 2013 05 January 2013 14 July 2013 14 July 2013 19 July 2013 06 July 2014