How to make a beautiful elevator in Minecraft. Guides: Making an elevator - simple instructions

Even with the help of modifications, the elevator is one of the most complex buildings in the game. But if we consider the option with and without a mod, the first one looks very simple. On a server with a mod, everything is extremely simple - you put signs with floor numbers throughout the building, and using special commands (the name of the command is different on each server, to clarify the correct command you need to contact the server administration) you move through the floors simply by right-clicking . It looks quite simple, but the difficulty lies in the construction of the entire structure, and you also need to be able to correctly enter commands into the signs.

Installing an elevator without a special mod is a very difficult task, and if you don’t have the patience, the necessary experience and skills, as well as a huge amount of time, you shouldn’t even try.

Why do you need an elevator?

Well it irreplaceable thing to move around big building, especially if the server does not have the ability to teleport, besides, this is a wonderful decoration for the house, which will speak about the high gaming skills of the owner. It’s worth noting right away that to create an elevator you will need a large number of materials, so it’s better to stock up on them right away so as not to search for them during construction.

Construction stages:

1. Using crystal cubes, create a high vertical column;
2. After the column is ready, a staircase needs to be placed on it every five to six blocks; the smaller the gap, the greater the speed of the elevator;
3. After installing the wooden staircase, a glass floor is made one cube higher, which will surround the column on all sides;
4. After that, a trolley is installed on each fragment of the staircase.

If everything was done correctly, when you approach the lowest cart, you will quickly go to the top floor, at the top you can go down at the same speed. If you want to go down even faster and more effectively, you can build a pool near the elevator, fill it with water and simply jump into it; the fall will be much faster than the elevator.

Is not the only way creating an elevator without using mods, there is also a way using red stones and mechanical pistons. Such an elevator looks more impressive, but creating it takes twice as long and is more expensive, and besides, such an elevator is not available on the most popular patches.

The elevator in the Minecraft game, as in our world, is a useful high-speed invention that allows maximum speed move between floors. Thanks to new patches, the process of creating elevators has changed somewhat since the first versions of the game, and now we will look at all methods of building elevators and all their types: from high-speed to less fast, but much more reliable and attractive.

The first method is one of the oldest and aesthetically unattractive, although its ascent speed is quite high. As you can see in the screenshot from the game, it is very easy to build such an elevator, because all you need is a trolley, the rails on which it will travel, and the material on which the rails will need to be placed. It should be remembered that all the components of such an elevator are made of iron and to create them you will need to craft a lot of iron ingots. As soon as the elevator is built as in the screenshot, we will need to aim the mouse cursor at the top trolley and right-click the mouse to start moving upward, transferring from one trolley to another. The rise, as we have already said, will be very fast. This type the elevator is common among players who do not care about the beauty of the structures they build.

If the previous option seemed unattractive to you, then there is another elevator, which is rightfully considered the favorite of amateur players to build from redstone. This is the very example of technical progress in Minecraft. The design contains a lot of redstone, repeaters and pistons, the number of which depends on the height to which you need to raise the elevator. This design is fully automated, so the player does not control anything while driving. However, this elevator also has its disadvantages. The most obvious is that the materials needed to build it are expensive, making it accessible to advanced players. A less obvious disadvantage is that the elevator only takes you up to a fixed height; intermediate stops are not possible. In order for the elevator to stop at the player's request, special modifications are needed, available only to professional players.

The latest way to create an elevator is simple and ingenious, just like you should do it yourself easy solution. In addition, this elevator is simple to construct, its components are inexpensive, and it is large enough to accommodate decorative elements. This elevator moves thanks to the physics of water in Minecraft: rising up in a block of water, the player passes through air and water-filled spaces alternately. Thus, he cannot suffocate, and the liquid can lift him to any height. The width of such elevators can be either one cube or two. This elevator is suitable for any building.

Now you know all the types of elevators in Minecraft and you can build any one that suits you personally, as well as add to the already existing list elevators with one more, invented by you personally.

The elevator is the most convenient and quick remedy moving in high-rise buildings in the world of Minecraft. The elevator can serve as a descent into a mine or a secret room under water. Eat various options manufacturing a descending device.

The easiest way to move, which is accessible even to a beginner, is an elevator made using notice boards. To do this, the server must have CraftBook (FalseBook). You need to create 2 notice boards from regular wood boards and sticks. Then, on one floor, for example, closer to the entrance/exit, place a notice board. You write the following in it: . On another floor, perform the same actions, but put up a sign with the inscription -.

It is important to consider the following points:
− The notice board must be attached to a block that is at the level of your head.
− This elevator is only relevant for two-story buildings in the minecraft world.
− Using this method, you can additionally set a trap for unwanted guests.

Lifting from notice boards is only possible if the CraftBook plugin is installed

How to make a trap? You just need to write on the notice board. Then your uninvited guest will “receive a ticket” only in one direction. He won't come back.

Automatic elevator due to a Minecraft bug

If someone thinks that bugs and features are for cheaters, then in the case of Minecraft this is a strong misconception. The fact is that the physics of cubes does not limit the imagination of players, so freedom of action and non-standard use of drops is one of the prerogatives of Mojang vendors. Returning to our elevators, it should be noted that there are countless construction options and everything will depend on the purpose of the elevator. The principle of crafting remains unchanged, which is based on a bug with trolleys. Therefore, we will look at the root mechanics and give a couple of design examples, and you, in turn, will customize the resulting lift at your discretion.

Note! This type The lift functions rationally only up to version 1.3.1. This bug has long been fixed in newer updates.

In general, the mechanics of such fast movement are based on a bug of any mount, where, being at a distance of 4-5 blocks, you can jump with your carcass into a boat or trolley, thereby covering this distance almost instantly. The key crafting ingredients here will be solid blocks, ladder links, a boat/trolley, a sign and a bucket of water. The last two components will be needed for the descent, if necessary.

So, using substitution, we build a column to the height we need and go down. We count three blocks from the beginning of the column and install a ladder on the fourth. Next, we build a platform from solid blocks, for example, cobbles or glass, exactly above the installed stairs, where we leave an opening.

After that, we place a trolley or its cheaper option - a boat - in an empty space. This, of course, will not affect the ascent speed, but will significantly save metal.

As you may have guessed, we carry out this sequence to the top of the column, alternating floors with mounts every 5 blocks (on every 4 I placed a ladder, remember?). Once you've had enough fun with your new elevator, it's time to think about the descent.

An economical option is to simply pour water on the ground, but we recommend not going to extremes and building a shaft, at the bottom of which use a bug with a sign and a bucket of water, so that if you fall you won’t flood the ground floor with your HP.

  • Relative cheapness
  • Almost instant lift
  • Exit control on floors
  • Doesn't work on versions higher than 1.3.1
  • No own descent

Piston elevator

The next example of an elevator relates to hard crafting, since instead of bugs, this method uses the piston, let’s say, “official” mechanics of Minecraft with all the redstone schemes that follow from it. In fact, after reading our series of guides, even a beginner will be able to craft such elevators, but at first glance it seems that there are no problems. The whole difficulty will lie in understanding the principle of operation of the repeater, but first things first.

We must immediately warn you that piston lifts pay off only on medium climbs using external design and styling. In other words, for some remote mine, building such an elevator makes no sense, since more than one stack of resources will be spent, not to mention the construction process itself.

The ideal application for one of the variations of piston lifts is a lift from the basement to the roof in mechanical houses, because only there it can be appreciated. Well, let's move on to actual crafting. To do this we need at least 2 stacks of solid blocks, pistons (sticky and regular), repeaters, red dust and a button/lever, as well as just a lot of patience.

Of course, if you have already encountered redstone schemes, then some elevator will seem like just fun for 5 minutes for you, but for the rest you will have to work hard. The basic principle of piston lifting is that each piston pushes the player to level 1 of the block, where he is already under the influence of the next one and so on until the “team” of the pistons pushes Steve to the very top.

As you understand, you will need to create a redstone circuit with a parallel connection, so everything is clear with this. To begin with, we lay out the sticky pistons towards us, then the regular ones, which we direct upward. After that, we isolate it with a solid block and lay out a Christmas tree from the pistons as in the screenshot.

We don’t forget about the principle of transferring charge through one block, so we add an additional layer of insulation on all sides except the back. We scatter dust at a distance of 3 blocks from the central button and draw these chains to all repeaters.

“Then how can we make sure that the pistons are activated one at a time?” - you ask, but this is where repeater mechanisms come in handy, which, by pulling the lever a certain number of times, thereby create a delay in the signal. Take a look at the screenshots as they will help you understand the repeater timings faster.

Blue color is a full delay, that is, 3 clicks, White color– 1 click, but gray remains in the default position.

After which, the front façade must be glazed to avoid falls and failures.
You can always familiarize yourself with the principle in more detail in the screenshots, but you get the idea: a redstone chain, which, when you press a button, activates the pistons, the delay of which is controlled by the repeaters.

In any case, just copy everything as in the screenshots and remember that the further the chain, the weaker the signal, so if you plan to do something on your own, then take the trouble to install additional repeaters on particularly long redstone chains.

Upon completion of construction, the appearance of your “high-tech” elevator will be quite strange, so use your imagination and arrange it as befits a real hotel elevator. In other words, design your projects in such a way that additional walls and floors hide all wiring and mechanisms. As you already understand, popular minimalism cannot be applied to cubes, so don’t be shy about resources.

  • Relative performance on the latest snapshots
  • The mechanism is easily integrated into buildings
  • Unlimited elevator height
  • Possible malfunctions and stuns in textures
  • Difficulty in wiring connections

Reliable piston lift with 2x2 lift cabin

Let's look at another interesting variation of the piston elevator, but unlike the previous construction, which consisted of sequential activation of each mechanism, the new elevator will use the principle of grouping 6 pistons into two associations, which, when activated by a button, will push a cabin measuring 2x2 blocks vertically and reversely direction.

The operating principle of such a lift is based on a new set of wooden hatches, which, when pushed by a piston, create free space for our cabin. In other words, after installation we will get a real elevator, which we will be able to call both on the first and on the second floor, because the activation wiring for each group of pistons will be mirrored.

So, for crafting, it is best to switch your world to creative mode, and all because, unlike the previous option, the amount of materials here is already quite serious. We need 12 regular pistons, 2 stacks of redstone dust, 4 stacks of solid materials, 10+ repeaters, 4 buttons and 8 wooden hatches. The work will be at heights, so spilling a couple of buckets at the construction site won’t hurt at all.

First, we build a “C” shaped bracket of 8 blocks and fill it with red dust. We perform exactly the same manipulations with two more brackets, after which we lay this frame with the first group of pistons as in the screenshot.

Let us immediately note that, for example, we are creating an elevator on the surface, but in the case of installation in a real house, we will have to prepare a rather deep shaft and think about masking the upper part of the mechanism.

We build our elevator cabin on a frame measuring 4x4 and put 8 hatches in the resulting 2x2 box. Make sure to attach them to the top point in the same direction so that they all go down when closed. After which, we immediately install a second booth, in which the ceiling of the first will act as a floor, that is, instead of 4x4, we make 3x4.

Important! Leave the four center blocks on the roof of the top elevator empty, thus creating a small recess. This reserve is needed for optimal operation of the entire structure.

We continue the construction by duplicating the lower solid frame with pistons and red dust, with the difference that the pistons will now be directed downwards. Don't forget to also install 4 buttons, as in the screenshot.

Now the fun part is making the connections. So, from the lower right button we build a cascade from any solid blocks to the very base of the lift and cover it with dust. For the first edge we install the repeater with a full pull, that is, in three clicks, and for the second bracket we install it only by one division. As for the third, we simply leave a path here. As a result, the first ascent is ready, all that remains is to carry out the descent.

To do this, we lay out a cascade of solid blocks similar to the rise, but now to the second upper group of pistons. In the same way, we cover it with dust and install repeaters, where we set the same timings: for the first edge, a full spin, for the second one, and leave the third one, but in order to avoid loss of current due to an increase in the length of the chain, we install an additional repeater without delay.

The minimum functionality is ready, but if you want to organize everything to the end, then you will only need to mirror the connections with repeaters. In other words, the top left button will now be responsible for ascent, and the bottom left button for descent. The question will follow: “Why bother again?”, but the fact is that if you do not live alone or return the other way to the first floor, you will find an unpleasant picture of the filler instead of a booth, so do not be lazy to press both buttons.

  • 100% guarantee of lifting, subject to adequate clicking
  • Feeling like a real elevator
  • Raising at least two players
  • Multifunctionality
  • Colossal dimensions of the mechanism
  • High production cost
  • Lifting is limited to two floors

Sometimes, after building high building, I get tired of running around the floors. This problem is solved by building an elevator. There are two methods for creating it; they differ both in the principle of operation and in the complexity of the device. Let's take a closer look at them.

First way

This elevator provides high speed lifting to absolutely any height (depending on the height of the building). In order to build it, you will need: a button, redstone, repeaters, sticky and regular pistons, as well as any opaque blocks.

You should start by building a lifting mechanism, because without it nothing will work. First you need to make a pillar 2 blocks wide. It is done like this - blocks and simple pistons are placed in a checkerboard pattern, front side out. Next, sticky pistons are placed directly behind the regular pistons, also with the front side facing out. That is, both types of pistons should point in the same direction.

Next, we work our magic on the connection diagram. It's hard to describe in words, so it's better to look at the picture. If you look from left to right, then the first repeater should have a delay of 2\4, the one in the middle should have a delay of 1\4, and the third repeater should be set to maximum delay. It is worth noting that repeaters are placed at the rear of the structure, that is, on the opposite side of the front surfaces of the pistons.

Next you will have to connect the circuit on the sides. This is a very important part and you can’t make mistakes. The picture shows left-hand side elevator Those repeaters that stand on a zigzag “ladder” should have a delay of 2/4. After this, it will be necessary to seal the front of the structure with glass. Glass is not only chosen for good review, and also to ensure that the player does not get stuck or suffocate when moving. If you use something else instead of glass, you won't be able to drive it.

If everything is done correctly, the elevator will work. In order to rise, you need to stand in the middle of the opening and press the button. You need to stand in the middle so that the player is pushed by two rows of pistons.

Second way

Previous construction may be difficult to replicate. If you want to build something simpler, you can use a different elevator. You will need to stock up on signs (ladders are not suitable), buckets of water, as well as any blocks.

We build a 3x3 pipe with a well in the center (in other words, an empty pipe). Next we put a sign, water above it, then another sign, and again water. We repeat this until the pipe is filled. After this, we make an entrance from below, 2 blocks high. If water flows, then we put a sign under it again. To rise you will need to hold down the spacebar and float to the top.