Making a comfortable dog bed. Comfortable and beautiful do-it-yourself bed for your beloved dog Do-it-yourself bed for a large dog

U pet There must be a cozy place where you can relax from the noise and bustle of people. Pet stores offer a huge selection of houses and mattresses, but making a warm and cozy dog bed with your own hands is very simple. Even if you don’t have a sewing machine, and the whole sewing experience consists of darning socks.

Denim, nylon, cotton and linen, flock, plush, fleece and velor, faux fur or satin. Filling materials include synthetic padding polyester, foam rubber, batting, woolen fabric, holofiber, and down. Almost any material is suitable for a bed. But keep in mind that your pet will dig, bite and stretch the fabric - strong, wear-resistant material will last longer;

Use strong threads and reliable accessories. If your dog has a habit of chewing on protruding/hanging things, do not decorate the bed with beads, bows, ruffles, etc.;

To make cleaning the lounger easier, sew the pillow in a cover. The bottom does not need to be made too soft and voluminous - soft sides and a pillow are enough for your pet to rest like a king;

Before making a dog bed, measure your pet again and think about where his bed will be. This will help you decide on the size sleeping place and the shape of the bed;

Consider the nature and degree of hairiness of the dog. For heat-loving sissies - high sides and a thick mattress. For curious activists, there are low sides so as not to limit the view. A pet wearing a rich fur coat will feel hot in a fur lounger.

In this article I will tell you how to sew a dog bed with your own hands from scrap materials. I’ll help you choose the material and decide on the sizes, give you a pattern and step by step instructions on cutting and sewing, I will give a master class on sewing. I will review original pet beds.

Before sewing a bed with a round side (sofa, bed), the dog is measured taking into account the outstretched front legs, add another 10 cm to this value. This parameter will be the length of the sleeping place.

If your pet always curls up during sleep, then the size of the sleeping place can be reduced.

To work you will need:

material and padding;
paper or old wallpaper for patterns;
safety pins, needle, scissors, strong thread;
ruler, chalk or pencil.

Many materials shrink after washing. Therefore, it is advisable to wash (wet) and iron it before sewing.

Otherwise, the stuffing inside the cover will clump together.

How to choose material

The material should be comfortable for your indoor pet (and other small breeds): not cause skin irritation and not produce unpleasant squeaks and rustles. You also need to think about resistance to constant friction, claws, washing and cleaning.

The best options for smooth-haired dogs are fleecy materials that accumulate and retain heat. These are velor, flock, plush, felt or corduroy. For heat-loving dogs, a bed can be made from faux fur with short pile, but this option is not suitable for pets prone to allergies.

For dogs with long hair It is better to choose a material that is smooth but durable. Ideal for: linen, cotton, denim, tapestry.

Fabrics made from 100% synthetics are best avoided.

Synthetic fabric accumulates static electricity and will frighten the animal from time to time. Allergies develop several times faster with synthetics. Also, you should not decorate the bed with small accessories; the dog can chew and swallow them.

Cutting out the parts

Even a beginner can sew a dog bed using this pattern. Only one pattern piece is used here. This eliminates the painstaking work itself - sewing several parts together.

How to make a cut:

two parts are drawn and cut out on paper;
on wide table lay the fabric face down;
pattern details are laid out on the surface of the fabric;
control lines and dots are drawn along the contour of the paper with chalk;
After this, the patterns are removed, the dimensions are checked again and the parts are cut out along the lines.

If you have an overlocker, it is advisable to trim the edges of the fabric. This way the material will not crumble - the bed will last longer.

Sewing and printing

To make the sleeping area more neat, it is better to start by working with a needle - sewing the parts together with large and straight stitches.

the bottom parts are sewn around the perimeter on three sides;
the remaining side is filled with stuffing and stitched;
stitching and stuffing the sides;
In the corners to fix the sides to the base, zippers or ties from laces, braid or pieces of used material are sewn.

The result is a bed with folding sides. The fasteners tighten and lift the sides vertically. In hot weather, you can lower them and get a spacious and comfortable mattress.

It should look like a sleeping place like this. Here the master did not cut out the corners when cutting. This can be done if the density of the filler allows you to make a fold.

You can skip the fasteners and just sew all the corners tightly. Then you will get a place with fixed sides, like this one.

The place for the bed is chosen away from possible drafts, appliances, electricity, heating and audio systems.

The lounger should be secluded, but accessible for cleaning.

Benefits of a DIY bed

Every dog, regardless of size, should have its own place to rest and sleep.

This is important for proper socialization, prevention of inflammatory joint diseases and simply for the pet’s comfort.

The lounger can be purchased at the store. But if you have sewing skills, you can sew it yourself.

Homemade beds have a number of advantages:

ideal sizes for the size of the dog;
significant savings;
the ability to choose a material whose color matches the interior of the house;
choosing the shape of a bed for the room;
the ability to choose the texture of the material based on the pet’s characteristics: coat length, tendency to allergies, heat-loving nature.

When choosing a sleeping place, you are not limited only by the size of the dog; it is important to consider the posture during sleep or rest. Regardless of the breed, your pet (Labrador, Husky, Boxer, etc.) may prefer a soft or hard base. All this can be taken into account when making a homemade bed.

Review of original dog beds

Despite the fact that the bed should first of all be comfortable for the dog, one should not forget about aesthetics.

It is ideal if the sleeping bed harmonizes well with the style of the interior - it does not feel like a random thing. You can get creative and create a place for your dog using completely unexpected items.

A practical option for an eco-style interior or cottage. You just need to treat the old box with a protective impregnation and apply the pet’s initials using a stencil and paint. Then place a suitable size pillow inside.

Don't rush to throw away your old hard-frame suitcase. It will suit any interior, creating a unique vintage corner. You can unfasten the covers or simply lift and fix them on the wall, and lay bedding inside.

An old bedside table or chest of drawers may become cozy place for your pet's sleep and rest. By the way, they can be painted to match the background of the interior or aged. To arrange a convenient place, all lower parts are dismantled and bedding is laid out at the bottom.

A good and practical option for small breeds. The owner's clothes retain his scent for a long time - the pet will feel closeness and be less bored during his absence.

There is also this option: a painted tire with bedding placed inside. This is a very controversial decision. Old tire highlights toxic substances, especially when elevated temperature premises. The dog may get sick.

I made a bed with sides two years ago from velor. My dog hardly sheds, so I wash her once every two months with safe detergents. I shake it out or treat it with adhesive tape twice a week. The bed still looks good - there are no signs of wear on it. I think that it will last another year, and the dog will not have to get used to the new place.

When bringing a dog into the house, the owner must create for it comfortable conditions accommodation. Therefore, you will have to allocate a corner in the apartment where his pet can relax and sleep, so that no one will disturb her.

If the cat does not become attached to a certain place in the house, then dogs require individual space. Therefore, if the owner wants to take proper care of his pet, then he should think about making a dog bed.

Options for organizing a place for a dog

The choice of equipment for sleeping and resting a dog today is quite large. They differ not only in design, but also in the level of comfort, which, in turn, determines their final cost. However, your pet will not always be happy to receive such a gift.

After all, each animal has its own tastes, so it is unknown whether she will be happy with the bed or whether you will waste your money. Therefore, you should not buy a bed for your animal in a store that is the first one that catches your eye.

It's best if you make it yourself, but here you will have to resolve many issues. First of all, you need to think about the size of the bed.

It is not easy to choose them, given that in the process of using it, the dog can change its shape, and then it will no longer receive the comfort that you included in this device during manufacturing.

If we consider the sun loungers available today based on price, then the choice will be determined depending on your financial capabilities. If you are ready to demonstrate all your generosity towards your pet, then you can purchase a bed decorated with natural furs and stones.

However, keep in mind that the dog will not appreciate such a step, because for him the best bed that provides highest level comfort. This is another reason why many owners decide to make this device with their own hands.

Types of patterns and beds for dogs

Dog beds can be very diverse, since in each case they are intended for a specific dog. Depending on this, the following options for beds can be distinguished:

Shape: round, oval, rectangular or other shape.
By filling - soft, filled with synthetic padding or plastic.
Intended use: for sleep and active recreation.
According to the level of rigidity - frameless (in the form of a pillow or mattress), framed (have a rigid base covered with soft fabric).
According to the amount of light - open and closed.

Features of the dog

Before you start making a bed, you should remember how your pet likes to relax. Among famous breeds There are some dogs that sleep in a ball. Therefore, it is best to make beds for such animals oval or round shape.

Some animals stretch their legs forward in their sleep, so for them it is best to do rectangular bed, because in the oval she will feel cramped. At the same time, there are many dogs who like enclosed beds.

In it she will feel protected, so nothing will disturb her during her rest. However, this feature is typical for small dog breeds, for which comfort is especially important.

In addition to the above, there are a lot of other dog beds, however, you will give your pet maximum pleasure if you make him a cozy place to relax with your own hands.

Advantages of a homemade lounger-house

If you want your homemade lounger-house to turn out exactly the way you intended it from the very beginning, then you need prepare thoroughly for work.

Remember that making a lounger is a painstaking job that will require a lot of time and effort. However, if you show patience and scrupulousness at each stage, you will be satisfied with the result.

By making a house-bed of suitable size, you will be sure that when your dog grows up, he will also not feel cramped in his place;
if you use fabric for the house bed that is not prone to the accumulation of static tension, then your dog will not produce “sparks” when you want to touch him;
it is necessary to choose the shape of the bed based on the animal’s preferences or physiology;
In order for the lounger-house to be not only practical, but also beautiful, it is necessary to choose its color and shape taking into account the design of the house.

But the most important thing here is that you will allow your dog to feel all the warmth and love with which you made this house-bed. All the energy of love, care and affection will be transferred to the dog if you try hard, paying attention to every little thing.

If you want everything to work out this way, then pick up a pencil or pen and start getting down to business.

Where to start making

First of all, we need to prepare the materials that we will need during work:

Even before creating a pattern, you must determine the length of the animal. Measurements should only be taken of the dog when it is lying on the floor with its paws fully extended.

If you are making a bed for a puppy, which is growing very rapidly every year, then after receiving the dimensions of the pattern you need to add half the length animal or simply focus on the current growth of the dog.

Dog bed patterns

To avoid difficulties when making a dog house bed from scrap materials with your own hands, it is recommended first prepare the pattern, thanks to which the process itself will be much easier.

When creating a pattern, pay attention to its shape, since a lot depends on this, and first of all, convenience.

To create a suitable pattern, you will need to draw the future option on paper, and then evaluate it to understand whether the animal will be comfortable on such a bed. If the option suits you, then you need it transfer to the wrong side of the fabric, after which you can start cutting it out.

DIY dog bed: master class

It is best to use foam rubber as the material for the bottom. In this case, the process of manufacturing the simplest design of a sun lounger will look like this:

If you keep a fairly large dog in the house, then in addition to the bed you will have to make an additional pillow. To make it comfortable for your pet to rest on, you can use the bottom of the lounger as a template for the pattern, and any material you have available as a filler.

But keep in mind that the filler must be safe for the health of the animal and the owner, do not cause allergic reactions.

If your pet has its own preferences, you can give the bed the required form. However, not all dog owners are good designers, so if you don’t have any options in mind, then you can use ready-made dog bed patterns.

You can find them on various Internet resources, where, as a rule, a master class on making a couch is available to everyone. After that, all you have to do is copy the pattern and use it to make a bed for your pet.

Big dog needs a big bed

Many dog breeders often keep large animals in their homes. In this case, making a lounger will become more burdensome for them. After all, it will have to use more materials and forces.

It is usually made from wood, since wood is optimal in terms of safety material for dogs. They will feel most comfortable on such a bed and will not be bothered by allergies.

At the same time, this device will cope with its main task - to provide good support dog's body.

Even if you do not have sewing skills, even in this case you can sew a comfortable dog bed from scrap materials with your own hands. You should not abandon this idea, citing the lack of necessary knowledge as an argument.

Even beginners can do this task. Having become acquainted with the main stages of making a dog bed, it becomes clear how easy it is to implement.

If necessary, you can use unnecessary materials and improvised means for the sunbed. You just need to remember that they must be safe for your pet.

To make your dog thank you for your efforts, try to do for him the most comfortable lounger, which will bring your pet maximum pleasure. In principle, this is not such a difficult task, because it takes no more than two to three hours to make a beautiful bed-house for dogs.

If you decide to make a bed with your own hands, then you will thereby demonstrate what strong feelings you have for the dog. This work can also be done in winter, when many owners have a lot of free time. And when all the steps are completed, you will be able to see for yourself how happy your pet will be after receiving such a gift.

From the moment a dog appears in the house, the owner has many worries. In addition to regular walks and grooming, the owner must take care of creating a special corner, where his pet can rest and sleep in comfortable conditions.

Those owners who truly love their pet will spare no time and effort to make a good and comfortable dog bed. Of course, you can do it easier and buy a ready-made bed, however, you can’t always count on it being the right size for the animal.

Therefore, it is better if you make the lounger yourself. This option seems preferable because you are more aware of your pet's characteristics, such as how he sleeps.

Therefore, it will certainly not be difficult for you to make a bed on which your dog will feel comfortable even after a couple of years. Special attention needs to be given bedding filler, since comfort largely depends on it.

And if you are afraid that you won’t succeed, you only need to watch a master class on making a lounger to understand how easy it is.

Every owner takes care of his dog: feeds, bathes, walks, that is, does everything to make the dog feel comfortable. For a dog to be comfortable at home, it needs good and comfortable bedding. It is necessary not only in the house, but can also be useful in the car or on the train.

Of course, you can buy bedding, but why waste money? Try making it yourself with your own hands.

Types of bedding

If your dog is still small, then need an absorbent mat. For what? Due to his young age, the puppy may pee or poop directly on the diaper. Such rugs are convenient because they can be easily washed and they will be clean again.

You can also replace the diaper with a baby mattress, it also dries quickly. You can take it on the road.

How to sew a bedding yourself with your own hands?

Now you know what types of bedding exist. Now let's try to sew it with our own hands. The bedding is sewn very simply and it doesn’t take much time to make it. The main thing is desire, and everything will work out.

General rules

The size of the bed should match the size of your pet.
The fabric must be strong and wear-resistant.
The shape of the product will depend on the place where the litter will lie.
Do not decorate the bed with small details. A dog may chew off this decoration and accidentally swallow or choke.

How to make a dog bed

The simplest bedding

To make it you will need:

Manufacturing stages:

To determine the size of the future bedding, you need to know the size of your pet. To do this, you need to measure it with a centimeter: from the front paw to the top of the head and from the tip of the nose to the tail.
Now you need to make a pattern on cardboard: a square, rectangle or circle (two parts). It will depend on your desire, but do not forget about the size, it must match the dimensions of your dog.
Cut out the resulting pattern using scissors.
Now transfer it to the fabric. To do this, you need to use a piece of soap or chalk. Attach the cardboard pattern to the fabric and trace it.
Cut out the resulting two parts using scissors.
Connect the two parts on three sides using a sewing machine or needle and thread. Remember to leave one side unstitched. Through it you will fill the litter.
Turn the litter out front side and fill it with the prepared filler.
Sew up the remaining side carefully. The bedding for your pet is ready.

Using the same pattern, you can sew a product for a dog without filler, from two pieces of fabric: top (soft) and bottom (made of more durable fabric). The two parts are sewn together sewing machine. All is ready! The advantage of this product is that it can be washed when it gets dirty.

This bed can be used both at home and in the car.

Foam rubber bedding - pillow

Your pet will love this pillow because it is soft and comfortable and is made of absorbent material. Another advantage of such a bed is that it does not need to be sewn.

To make it you will need:

Stages of work:

On the fiberboard, draw a rectangle that matches the size of your pet.
Cut it out using a utility knife.
Attach the resulting rectangle to the foam rubber and circle it.
Cut out the resulting part using scissors.
The same rectangle needs to be drawn on a piece of fabric, and then cut out. Don't forget to leave an allowance of about two centimeters.
Place foam rubber on the fiberboard and glue it with tape.
Wrap the resulting bedding in fabric and secure it with a stapler.

If you want your bed to have sides, then you will have to make them too. To do this, the foam rubber needs to be rolled into a roll and secured with tape. Then wrap the resulting side with fabric and attach it to the product using a stapler. There can be either three or four such sides. You can also take this bedding with you in the car or on the train.

To keep the product clean, you can sew a cover for it. This is convenient because it can be removed and washed at any time. And your pet's bedding will always be clean.

Warm bedding

To sew such a product, you will need:

Insulation (sintepon, batting, unnecessary blanket);
Textile;
Sewing machine;
A piece of soap or chalk;
Centimeter.

Manufacturing stages:

We measure the height and length of your pet.
Let's make a pattern.
We cut out two parts, taking into account an allowance of two centimeters.
We connect all the parts: lower part - insulation - upper part.
We stitch the resulting product.

If your dog is unclean and after a walk he immediately lies down on his product, then in this case the top of the product can be sewn from water-repellent fabric. If it gets dirty, you don’t need to wash it, just wipe with a damp cloth or sponge.

Special dog bed for car

This product is designed to protect the car from moisture, since the dog may wet itself or get sick and vomit.

To make such a product, you only need durable and water-repellent fabric: polyester or tarpaulin.

If your dog is neat and does not shed, for example, a Yorkie, then you can sew the following bedding for it: cut a piece of fabric so that it is as wide as one chair, and the length should be to the floor. Sew this section, tucking the edges. Then sew a strong belt to it so that the mat can be attached to the chair.

To protect and back front seat, such a product needs to be made twice as long. Then sew a belt to the bottom so that it can be attached to the front seat. By attaching the product to the seat, you will have a hammock. It’s comfortable for the dog, and you won’t worry about cleanliness.

This product can also be made with sides. To do this, measure the length from one edge to the other from the bottom and top. The result should be a segment in the form of a trapezoid or rectangle. Cut two of these pieces. The bottom must be sewn to the base of the product, and a lock can be sewn on the sides. Sew a belt in the center of each side. It can be attach to the passenger's handles which are located near the ceiling. This is necessary so that the sides do not sag.

If you don’t mind the car and don’t want to waste your time sewing such a product for your pet, then you can take a simple mattress or pillow on the road, the main thing is that this bed is easy to wash.

Now you know everything about bedding and can safely start making it.

DIY dog bed

Every dog in a house or apartment must have its own place where no one will disturb it. Here she can sleep or relax peacefully, knowing that she will not disturb anyone. This is exactly the function that a dog bed performs. This is especially true for smooth-haired animals, small breed dogs and puppies. It may be cold for them to sleep on the same bedding in winter. And of course, a comfortable soft bed will be needed for an elderly pet suffering from arthritis or other joint diseases.

Sunbed sizes

To determine what size a dog bed should be for a certain breed, you need to measure how much space a pet needs when lying on its side with its legs extended. Puppies, especially dogs large breeds, may initially have a small litter, which must be replaced after a year. It should be noted that beds that are too spacious will not keep warm - in the off-season, when the heating has not yet been turned on, and it is already cold outside, the pet may freeze and catch a cold. And in the summer heat, a cramped bed with sides will also be ignored, because the dog will be too hot on it.

Form

The shapes of a “dog house” can be completely different: round, square, heart-shaped, fish-shaped, flower-shaped, and so on. Of course, this will look very cute for dogs of medium-sized breeds, such as Chihuahua, Spitz, Toy Terrier, Pekingese, lapdog, Yorkshire Terrier. A funny lounger will appeal to you and little puppy. Dachshunds and other mink dogs will love kennels, and puppies love to hide in the kennels. Medium to large dogs living in an apartment will prefer a sofa or ottoman. But the most important thing is whether such beds are comfortable for dogs. Photo different options You can see the design below.

However, before deciding what shape to buy a bed, you should look at what position your pet prefers to sleep in. If he likes to curl up, then it is better to sew a dog bed with your own hands in the shape of an oval or circle. If he prefers to stretch out his legs, then a rectangular shape is best.

What are beds made of?

Most sun loungers are made with a reliable and durable base, which is covered on top with various soft materials. It can be fleece, fur, suede. Fleecy materials are perfect for those with short hair, but velvet, fur and plush collect dust and shedding hair. A nylon or plastic dog bed is an excellent solution as it is easy to clean and works well for a long-haired dog. In addition, plastic sun loungers have proven themselves in terms of durability.

Natural fabrics are rarely used by manufacturers. Cotton and linen are very pleasant to animals and are easy to wash, but they do not always look quite presentable.

Bedding made of foam rubber and synthetic padding quickly collapses even under a small dog. Wooden beds do not have harmful fumes or impurities. Large breed dogs especially like these beds, because they love to scratch their teeth. However, for their owners, such bedding will be beautiful, but short-lived and expensive.

Where to place the sun lounger?

As a rule, a dog bed is placed against the wall in a secluded corner. To prevent your pet from staining the wallpaper and pressing against the wall, it is better to attach a border. Depending on the size of the animal, its height ranges from 20 to 40 cm. At your discretion, the sides can be hard, made of plywood, or soft, made in the form of a pad or roller. If you decide to make a dog bed with your own hands, you need to ensure that the soft side is easily washable or has removable pillowcases, since it will quickly get dirty.

When choosing a lounger, you should not pay much attention to various decorations. They will delight you for only a short time, because the dog will happily taste different bows, beads and ruffles.

Transformable lounge chairs with ties are very convenient to use. This design makes cleaning much easier and can be used with or without sides. In this case, it is best to hide the ends of the ties in folds so that they attract as little attention as possible.

The materials used may also be hazardous to your pet's health. Safe dyes, high-quality plastic and hypoallergenic filler without harmful impurities at a cheap price - this is fantastic.

Advantages of a DIY bed

The most obvious and important of them:

It will be tailored exactly to your pet's measurements.
To make a bed, you can choose safe materials that do not cause allergies.
In color and shape it will be the perfect complement to your interior.
Doing it yourself will save you a lot of money.
The model of the bed will fully correspond to the habits and character of your pet. He will feel comfortable and comfortable.

But the most important thing is that caring for a pet will bring pleasure and joy, which money definitely cannot buy.

We sew a lounger ourselves

To sew a simple dog bed with your own hands, you will need thick fabric for covering, soft fabric for pillowcases and foam rubber 5 cm thick. Two patterns should be made from foam rubber: the bottom of the lounger of a certain size and the side of the required height and length on three sides of the bottom. The pattern for your dog bed will depend on the shape you choose, but it’s best to start with a simple rectangle or circle. Then the foam rubber is applied to the upholstery fabric, from which two parts for the side and two parts for the bottom are cut out, taking into account a seam allowance of about two centimeters. Covers are sewn from fabric into which foam rubber patterns must be inserted. Then the side and bottom need to be sewn together.

How to make removable pillowcases

It is best to prepare a removable mattress cover. You should make two of these covers so that you can wash them periodically. For pillowcases, natural smooth materials that are easy to shake off wool, such as linen and cotton, are best suited. Please note that the lighter the fabric used, the more often it will need to be washed.

Removable pillowcases are cut to the size of the finished product. It is better to replace a fastener in the form of a zipper or button with a regular elastic band or use Velcro.

Taffeta for dogs

You can also make a bed based on a sheet of chipboard or plywood. Similar sunbeds for large dogs very comfortable and resemble small sofas without a side. Furniture legs up to 10 cm high should be attached to a sheet of the required size, then a mattress should be sewn onto the base. The easiest way is to cut a mattress from an unnecessary blanket or cut it out of fabric and fill it with padding polyester.

To attach the mattress to the base, you can use wide elastic bands. And sew two pillowcases on top for a change. For example, you can sew them in the likeness of regular sheets for cribs - stretch an elastic band around the perimeter. Or it can be made like a pillowcase. Pillowcases should be washed when they get dirty, but it is important to periodically beat the mattress in the snow in winter and dry it well in the sun in summer.

If you use these during your work simple tips, then learning how to make a dog bed yourself will not be difficult.